TP-Link AC50 Configuration Manual Download

Page: 17 / 112

Connection Type

Select the connection type for the interface. Only static IP is supported at

present.

IP Address

Specify an IP address for the interface.

Subnet Mask

Specify a subnet mask for the interface.

Default Gateway

(Optional) Specify a default gateway for the interface.

MTU

Specify the MTU (Maximum Transmission Unit) for the interface. Its value is

between 576 to 1500 and 1500 by default.

Primary DNS

(Optional) Specify the primary DNS server for the interface.

Secondary DNS

(Optional) Specify the secondary DNS server for the interface.

MAC Address

The MAC address is filled automatically. You can modify it manually.

Description

Specify a description for the entry to make it easier to search for and manage.

Click

to finish the settings.

3.2 DHCP Server

3.2.1 DHCP Server

Choose the menu

Network > DHCP Server > DHCP Server

to load the following page.

Figure 3-3

DHCP Server

DHCP (Dynamic Host Configuration Protocol) allows the wireless controller to assign IP

addresses, subnet masks, default gateways and other IP parameters to CAPs and clients

that request this information. In the global settings you can select that the DHCP server

assigns IP parameters to AP only or both AP and client.

Summary of Contents for AC50

















































































































Search results

Summary of Contents for AC50

Reviews:

Related manuals for AC50

Brands by name

Popular brands

TP-Link AC50, Configuration Manual

Search results

Summary of Contents for AC50

Reviews:

Related manuals for AC50

Brands by name

Popular brands