TP-Link AC50 Configuration Manual Download

Page: 107 / 112

103

RX Rate (Kb/s)

Displays the rate data frames are received.

TX Packet Rate (Pkt/s)

Displays the rate data packets are transmitted.

Total TX Bytes

Displays the total bytes transimitted by the interface.

Total RX Bytes

Displays the total bytes received by the interface.

Total TX Packets

Displays the total packets transmitted by the interface.

Total RX Packets

Displays the total packets received by the interface.

9.4 Diagnostics

Choose the menu

System Tools > Diagnostics > Diagnostics

to load the following page.

Figure 9-9

Diagnostics

Here you can use the diagnostic tools to detect the current network connection status.
The device provides

Ping

and

Traceroute

tools to help you troubleshoot network

connection problems.
The Ping tool sends packets to a target IP Address or Domain Name and logs the results,

such as the number of packets sent and received, and the round-trip time.
The Traceroute tool sends packets to a target IP Address or Domain Name and displays

the number of hops and time to reach the destination.

Diagnostic Tool

Specify the diagnostic tool as Ping/Traceroute.

Summary of Contents for AC50

















































































































Search results

Summary of Contents for AC50

Reviews:

Related manuals for AC50

Brands by name

Popular brands

TP-Link AC50, Configuration Manual

Search results

Summary of Contents for AC50

Reviews:

Related manuals for AC50

Brands by name

Popular brands