TP-Link AC50 Configuration Manual Download

Page: 63 / 112

Figure 7-19

Add a New Facebook Entry

Status

Specify whether to turn on the Facebook authentication entry.

SSID

Specify the SSIDs that will be enabled with Facebook authentication.

Note: The SSIDs labeled "Bound" are being used by other authentication

entries. If these SSIDs are selected, the original configuration will be replaced

by the current configuration.

Configuration

Click this button to specify the Facebook Page. For details, refer to the

following introduction.

Facebook Page

Displays the name of the specified Facebook Page.

Description

Specify a description for the Facebook entry to make it easier to search for and

manage.

Click the

Configuration

button and log in to your Facebook account in the pop-up window.

Then configure the Facebook Wi-Fi parameters and click

Save Settings

Summary of Contents for AC50

















































































































Search results

Summary of Contents for AC50

Reviews:

Related manuals for AC50

Brands by name

Popular brands

TP-Link AC50, Configuration Manual

Search results

Summary of Contents for AC50

Reviews:

Related manuals for AC50

Brands by name

Popular brands