TP-Link AC50 Configuration Manual Download

Page: 85 / 112

Figure 7-42

Splash Page Configurations

3 Configure Onekey Online
In this case, we set the free online time as 30 minutes, and the client needs to restart the

connection after the time expires.
Choose the menu

Authentication > Portal Authentication > Onekey Online.

Click

add a new entry. Turn on the Onekey Online and set the related parameters.

Figure 7-43

Onekey Online Configurations

7.7.3 Application for Voucher



Network Requirements

A hotel wants to offer customers internet access. To access the internet, the customers

should provide the correct codes which are got from the hotel to pass the authentication.
In this case, the hotel can use the Voucher feature to generate voucher codes and assign

these codes to the clients. AC can use the built-in authentication server to authenticate the

clients.

Summary of Contents for AC50

















































































































Search results

Summary of Contents for AC50

Reviews:

Related manuals for AC50

Brands by name

Popular brands

TP-Link AC50, Configuration Manual

Search results

Summary of Contents for AC50

Reviews:

Related manuals for AC50

Brands by name

Popular brands