TP-Link AC50 Configuration Manual Download

Page: 31 / 112

4.2 AP Firmware Upgrade

Choose the menu

AP Control > AP Firmware Upgrade > AP Firmware Upgrade

to load the

following page.
With it enabled, import the correct firmwares and set the starting upgrade time. The

connected APs will start to upgrade at the specified time. If it is disabled, the APs that

haven’t started upgrading will not be upgraded.

Figure 4-5

AP Firmware Upgrade

AP Model

Displays the AP model.

Hardware Version

Displays the current hardware version.

Firmware Version

Displays the imported firmware version.

Upgrade Starting Time

After the upgrade file has been imported successfully, specify the upgrade

starting time. With upgrade enabled, the APs of this model will automatically

upgrade using the upgrade file.

Upgrade Process

Displays the upgrade process. The format is X/Y/Z, which means there are Z

APs of this model in the system, with Y APs waiting to upgrade and X APs have

upgraded successfully. Click the numbers to check each AP's upgrade status.

Upgrade Failure

Displays the number of APs which failed to upgrade. Click the number to check

the detailed log information.

Summary of Contents for AC50

















































































































Search results

Summary of Contents for AC50

Reviews:

Related manuals for AC50

Brands by name

Popular brands

TP-Link AC50, Configuration Manual

Search results

Summary of Contents for AC50

Reviews:

Related manuals for AC50

Brands by name

Popular brands