TP-Link AC50 Configuration Manual Download

Page: 57 / 112

7.2.3 Onekey Online

In Onekey Online Authentication, clients can pass the authentication without entering any

parameters on the login page .
Choose the menu

Authentication > Portal Authentication > Onekey Online

to load the

following page.

Figure 7-12

Onekey Online

Here you can view the Onekey Online Authentication information and edit the entries.
Click

to add a new entry.

Figure 7-13

Add a New Onekey Online Entry

Configure the related parameters and click

Status

Specify whether to turn on the Onekey Online authentication entry.

SSID

Specify the SSIDs that will be enabled with Onekey Online authentication.

Note: The SSIDs labeled "Bound" are being used by other authentication

entries. If these SSIDs are selected, the original configuration will be replaced

by the current configuration.

Splash Page

Select the splash page of Onekey Online authentication.

Free Authentication

Timeout

Select the free online time for users who have passed onekey online

authentication.

Summary of Contents for AC50

















































































































Search results

Summary of Contents for AC50

Reviews:

Related manuals for AC50

Brands by name

Popular brands

TP-Link AC50, Configuration Manual

Search results

Summary of Contents for AC50

Reviews:

Related manuals for AC50

Brands by name

Popular brands