TP-Link AC50 Configuration Manual Download

Page: 77 / 112

Click

to add a new entry. There are two Match Modes, including Five Tuple Type and

URL Type.



Five Tuple Type

Five Tuple Type is configured based on the IP address range, MAC address, VLAN ID,

port and protocol. It is recommended to select Five Tuple Type when there are many

parameters to be configured in the free authentication policy.

Figure 7-34

Five Tuple Type

Strategy Name

Specify a name for the free authentication policy entry.

Match Mode

Specify a match mode for the free authentication policy.

Source IP Range

Specify the source IP address and subnet mask of the free authentication

policy entry.

Source MAC Address

Specify the source MAC address of the free authentication policy entry.

Source VLAN

Specify the source VLAN ID of the free authentication policy entry.

Source Port

Specify the source port range of the free authentication policy entry.

Destination IP Range

Specify the destination IP address and subnet mask of the free authentication

policy entry.

Destination Port

Specify the destination source MAC address of the free authentication policy

entry.

Protocol

Specify the service protocol of the free authentication policy entry.

Summary of Contents for AC50

















































































































Search results

Summary of Contents for AC50

Reviews:

Related manuals for AC50

Brands by name

Popular brands

TP-Link AC50, Configuration Manual

Search results

Summary of Contents for AC50

Reviews:

Related manuals for AC50

Brands by name

Popular brands