Toyota Sienna 2021 Manual Download

Page: 208 / 600

207

3-5. Opening, closing the windows and moon roof

Before

driving

WARNING

●

Check to make sure that all pas-

sengers do not have any part of

their body in a position where it

could be caught when the moon

roof is being operated.

●

When using the wireless remote

control or mechanical key and

operating the moon roof, oper-

ate the moon roof after checking

to make sure that there is no

possibility of any passenger

having any of their body parts

caught in the moon roof. Also,

do not let a child operate moon

roof by the wireless remote con-

trol or mechanical key. It is pos-

sible for children and other

passengers to get caught in the

moon roof.

●

When exiting the vehicle, turn

the power switch to OFF, carry

the key and exit the vehicle

along with the child. There may

be accidental operation, due to

mischief, etc., that may possibly

lead to an accident.

■

Jam protection function

●

Never use any part of your body

to intentionally activate the jam

protection function.

●

The jam protection function may

not work if something gets

caught just before the moon

roof is fully closed. Also, the jam

protection function is not

designed to operate while the

switch is being pressed. Take

care so that your fingers, etc. do

not get caught.

Summary of Contents for Sienna 2021

























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Sienna 2021

Reviews:

Related manuals for Sienna 2021

Brands by name

Popular brands

Toyota Sienna 2021, Manual

Search results

Summary of Contents for Sienna 2021

Reviews:

Related manuals for Sienna 2021

Brands by name

Popular brands