Toyota Sienna 2021 Manual Download Page 178

Page: 178 / 600

177

3-3. Adjusting the seats

Before

driving

folded automatically.

Push the seat against the
floor.

Open the flaps.

■

Before returning the third
seats

Be sure to move the second
seats forward from the rearmost
position, as they may interfere
with the third seats returning
operation.

■

Returning the third seats

Return the flaps.

Pull the handle and lift up the seat

rearward.

Push the seat forward and
then engage the front leg
locks.

Make sure the front and rear legs

are locked securely.

Raise the seatback and the
outside head restraints.
(



P.175)

WARNING

■

When folding the rear seat-

backs down

Observe the following precau-

tions. Failure to do so may result

in death or serious injury.

●

Do not fold the seatbacks down

while driving.

●

Stop the vehicle on level

ground, set the parking brake

and shift the shift lever to P.

Summary of Contents for Sienna 2021

























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Sienna 2021

Reviews:

Toyota Sienna 2021, Manual, Page: 178 / 600

Search results

Summary of Contents for Sienna 2021

Reviews: