Toyota Sienna 2021 Manual Download Page 111

Page: 111 / 600

111

2-1. Instrument cluster

Vehicle

statu

s information an

d in
dicator

played.

: The score result is displayed only

when “Eco Score” is selected for
“Trip Summary”. (



P.112)

■

Change the speedometer
display (7-inch display)



P.115

■

Distance to empty

●

This distance is computed based

on your average fuel consump-

tion. As a result, the actual dis-

tance that can be driven may

differ from that displayed.

●

When only a small amount of fuel

is added to the tank, the display

may not be updated. When refuel-

ing, turn the power switch off. If

the vehicle is refueled without

turning the power switch off, the

display may not be updated.

●

When “Refuel” is displayed, the

remaining fuel amount is low and

the distance that can be driven

with the remaining fuel cannot be

calculated.

Refuel immediately.

■

ECO Accelerator Guid-

ance/“Eco Score” will not oper-

ate when

The ECO Accelerator Guid-

ance/“Eco Score” will not operate in

the following situations:

●

The Hybrid System Indicator is not

operating.

●

The vehicle is being driven using

the dynamic radar cruise control

with full-speed range.

■

Driving support system
information display

Select to display the operational

status of the following systems:



LTA (Lane Tracing Assist)
(



P.277)



Dynamic radar cruise control
with full-speed range
(



P.290)



RSA (Road Sign Assist) (if
equipped) (



P.287)

■

Navigation system-linked
display (if equipped)

Select to display the following
navigation system-linked infor-
mation.



Route guidance



Compass display (north-up
display/heading-up display)

■

Route guidance to destination

display

When the route guidance to destina-

tion display is enabled on the head-

up display, it will not be displayed on

the multi-information display.

(



P.118)

Select to enable selection of an
audio source or track on the dis-
play.

■

Drive information (4.2-inch
display)

2 items that are selected using
the “Drive Info Items” setting

Driving support system
information display (

)

Audio system-linked dis-
play (if equipped) (

)

Vehicle information dis-
play (

)

Summary of Contents for Sienna 2021

























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Sienna 2021

Reviews:

Toyota Sienna 2021, Manual, Page: 111 / 600

Search results

Summary of Contents for Sienna 2021

Reviews: