Toyota Sienna 2021 Manual Download Page 409

Page: 409 / 600

409

6-3. Do-it-yourself maintenance

Maintena

nce
a

nd ca

Hybrid bat-
tery (traction
battery) air
intake vent
(



P.440)

• Vacuum cleaner,

etc,

• Phillips screw-

driver

Light bulbs
(



P.448)

• Bulb with same

number and watt-
age rating as origi-
nal

• Phillips-head

screwdriver

• Flathead screw-

driver

• Wrench

Radiator and
condenser
(



P.417)



Tire inflation
pressure
(



P.435)

• Tire pressure

gauge

• Compressed air

source

Washer fluid
(



P.418)

• Water or washer

fluid containing
antifreeze (for win-
ter use)

• Funnel (used only

for adding water or
washer fluid)

WARNING

The engine compartment contains

many mechanisms and fluids that

may move suddenly, become hot,

or become electrically energized.

To avoid death or serious injury,

observe the following precautions.

Items

Parts and tools

■

When working on the engine

compartment

●

Make sure that “IGNITION ON”

on the multi-information display

and the “READY” indicator are

both off.

●

Keep hands, clothing and tools

away from the moving fan.

●

Be careful not to touch the

engine, power control unit, radi-

ator, exhaust manifold, etc. right

after driving as they may be hot.

Oil and other fluids may also be

hot.

●

Do not leave anything that may

burn easily, such as paper and

rags, in the engine compart-

ment.

●

Do not smoke, cause sparks or

expose an open flame to fuel or

the battery. Fuel and battery

fumes are flammable.

●

Be extremely cautious when

working on the battery. It con-

tains poisonous and corrosive

sulfuric acid.

■

When working near the elec-

tric cooling fan or radiator

grille

Be sure the power switch is OFF.
With the power switch in ON, the

electric cooling fan may automati-

cally start to run if the air condi-

tioning is on and/or the coolant

temperature is high. (



P.417)

■

Safety glasses

Wear safety glasses to prevent

flying or falling material, fluid

spray, etc., from getting in your

eyes.

Summary of Contents for Sienna 2021

























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Sienna 2021

Reviews:

Related manuals for Sienna 2021

Brands by name

Popular brands

Toyota Sienna 2021, Manual

Search results

Summary of Contents for Sienna 2021

Reviews:

Related manuals for Sienna 2021

Brands by name

Popular brands