Toyota Sienna 2021 Manual Download | Manualshive

Page: 164 / 600

background image

163

3-2. Opening, closing and locking the doors

3

Before

driving

The power back door system

can be enabled/disabled on the
multi-information display.
(



If the power back door is dis-
abled, it will remain disabled
unless it is enabled on the multi-
information display. (It will not
be enabled even when the
power switch is turned off and
then back to ON.)

The Hands Free Power Back
Door (kick sensor) can be
enabled/disabled on the multi-
information display. (

If the Hands Free Power Back
Door is disabled, it will remain
disabled unless it is enabled on
the multi-information display. (It
will not be enabled even when
the power switch is turned off
and then back to ON.)

The power back door open posi-
tion can be adjusted by using
the power back door switch on
the back door or on the multi-
information display.

NOTICE

●

Do not park the vehicle near

objects that may move and con-

tact the lower center part of the

rear bumper, such as grass or

trees.

If the vehicle has been parked

for a while near objects that

may move and contact the

lower center part of the rear

bumper, such as grass or trees,

the kick sensor may not oper-

ate. In this situation, move the

vehicle from the current position

and then check if the kick sen-

sor operates. If it does not oper-

ate, have the vehicle inspected

by your Toyota dealer.

●

Do not subject the kick sensor

or its surrounding area to a

strong impact.

If the kick sensor or its sur-

rounding area has been sub-

jected to a strong impact, the

kick sensor may not operate

properly. If the kick sensor does

not operate in the following situ-

ations, have the vehicle

inspected by your Toyota

dealer.

• The kick sensor or its surround-

ing area has been subjected to

a strong impact.

• The lower center part of the rear

bumper is scratched or dam-

aged.

●

Do not disassemble the rear

bumper.

●

Do not attach an accessory con-

taining metal or apply metallic

paint to the rear bumper.

Canceling the power back
door system (vehicles
with power back door)

Canceling the Hands Free
Power Back Door (vehi-
cles with kick sensor)

Adjusting the open posi-
tion of the back door
(vehicles with power back
door)

«
...
162
163
164
165
166
...
»

Summary of Contents for Sienna 2021

























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Sienna 2021

Brand: Abarth Pages: 176

GRAND CHEROKEE 2023

Brand: Jeep Pages: 108

PRIME DESIGN VRI3-E-PM11

Brand: Safe Fleet Pages: 12

1973 Crown Hardtop

Brand: Toyota Pages: 50

Brand: Whispbar Pages: 15

Brand: Easee Pages: 12

Brand: JANE Pages: 58

2005 JR41 Stratus

Brand: Dodge Pages: 293

Brand: JBL Pages: 12

Brand: Renault Pages: 3699

Brand: Lexus Pages: 6

Bounder turbo diesel 2001

Brand: Fleetwood Pages: 166

PRO-FLO XT 3527

Brand: Edelbrock Pages: 39

Brand: Flash Cover Pages: 2

Brand: Rola Pages: 2

iCarPlay Direct Connect 2000

Brand: Monster Pages: 66

Brand: v.link Pages: 15

ESPAS10 MONEYBOX

Brand: BFT Pages: 26

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands