manualshive.com logo in svg

Toyota Sienna 2021, Manual, Page: 72 / 600

Share
Download
Toyota Sienna 2021 Manual Download Page 72

72

1-2. Child safety

Anchor bracket

Top tether strap

■

Fixing the top tether strap 
to the anchor bracket (sec-
ond seats)

Install the child restraint system 
in accordance to the operation 
manual enclosed with the child 
restraint system.

Outboard seats

1

If the head restraint interferes 
with your child restraint sys-
tem, and the head restraint 
can be removed, remove the 
head restraint. Otherwise, 
put the head restraint in the 
upper most position. 
(

P.183)

2

Latch the hook onto the 
anchor bracket and tighten 
the top tether strap.

Make sure the top tether strap is 

securely latched. (

P.67)

When installing the child restraint 

system with the head restraint 

being raised, be sure to have the 

top tether strap pass underneath 

the head restraint for the single 

tether strap. For V-shaped top 

tether strap, the top tether strap can 

pass on both sides of the head 

restraint, without passing under-

neath the head restraint.

Hook

Top tether strap

Center seat

1

If the head restraint interferes 
with your child restraint sys-
tem, and the head restraint 
can be removed, remove the 
head restraint. Otherwise, 
put the head restraint in the 
upper most position. 
(

P.183)

2

Latch the hook onto the 
anchor bracket and tighten 
the top tether strap.

Make sure the top tether strap is 

securely latched. (

P.67)

When installing the child restraint 

system with the head restraint 

being raised, be sure to have the 

top tether strap pass underneath 

the head restraint. Do not install 

child restraints with V-shaped top 

tether strap.

A

B

A

B

Summary of Contents for Sienna 2021

























































































































































































































































































































































































































































































































































































































Reviews:

No comments