Toyota Sienna 2021 Manual Download

Page: 107 / 600

107

2-1. Instrument cluster

Vehicle

statu

s information an

d in
dicator

Select to display fuel consump-
tion data in various forms.

■

Speedometer display/Dis-
tance to empty (4.2-inch
display)

Speedometer display

Displays the vehicle speed.

Distance to empty

Displays the driving range with
remaining fuel. (



P.110)

■

Fuel Economy



4.2-inch display

Following information is dis-
played.

Distance to empty

Displays the driving range with
remaining fuel. (



P.110)

Current fuel economy

Displays the instantaneous current
fuel economy.

Average fuel economy

Displays the average fuel economy
since the function was reset or the
average fuel economy after starting
or refueling.

*1, 2, 3

The average fuel economy selected
by “Fuel Economy” on the

screen is displayed. (



P.112)

:Use the displayed fuel consump-

tion as a reference only.

:Average fuel economy since the

function was reset can be reset
by pressing and holding “OK”.

:Average fuel economy after

starting is reset each time the
hybrid system stops.



7-inch display

Following information is displayed.

Vehicle information dis-
play (



P.111)

Settings display
(



P.112)

Warning message dis-
play (



P.117)

Driving information dis-
play (

)

Summary of Contents for Sienna 2021

























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Sienna 2021

Reviews:

Related manuals for Sienna 2021

Brands by name

Popular brands

Toyota Sienna 2021, Manual

Search results

Summary of Contents for Sienna 2021

Reviews:

Related manuals for Sienna 2021

Brands by name

Popular brands