Toyota Sienna 2021 Manual Download Page 265

Page: 265 / 600

264

4-5. Using the driving support systems

4-5.Using the driving support systems

■

PCS (Pre-Collision System)



P.269

■

LTA (Lane Tracing Assist)



P.277

■

AHB (Automatic High
Beam)



P.252

■

RSA (Road Sign Assist) (if
equipped)



P.287

■

Dynamic radar cruise con-
trol with full-speed range



P.290

Two types of sensors, located
behind the front grille and wind-
shield, detect information neces-
sary to operate the drive assist
systems.

Radar sensor

Front camera

Toyota Safety Sense

2.0

The Toyota Safety Sense
2.0 consists of the following
drive assist systems and
contributes to a safe and
comfortable driving experi-
ence:

Driving assist system

WARNING

■

Toyota Safety Sense 2.0

The Toyota Safety Sense 2.0 is

designed to operate under the

assumption that the driver will

drive safely, and is designed to

help reduce the impact to the

occupants and the vehicle in the

case of a collision or assist the

driver in normal driving condi-

tions.

As there is a limit to the degree of

recognition accuracy and control

performance that this system can

provide, do not overly rely on this

system. The driver is always

responsible for paying attention to

the vehicle’s surroundings and

driving safely.

Sensors

Summary of Contents for Sienna 2021

























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Sienna 2021

Reviews:

Toyota Sienna 2021, Manual, Page: 265 / 600

Search results

Summary of Contents for Sienna 2021

Reviews: