manualshive.com logo in svg

Toyota Sienna 2021, Manual, Page: 199 / 600

Share
Download
Toyota Sienna 2021 Manual Download Page 199

198

3-4. Adjusting the steering wheel and mirrors

 is displayed.

The Digital Rear-view 
Mirror is extremely hot.
(The display will gradu-
ally become more dim. If 
the temperature contin-
ues to increase, the Digi-
tal Rear-view Mirror will 
turn off.)

Reducing the cabin tem-
perature is recom-
mended to reduce the 
temperature of the mir-
ror.
(

 will disappear when 

the mirror becomes 
cool.)

If 

 does not disap-

pear even though the 
mirror is cool, have the 
vehicle inspected by 
your Toyota dealer.

The lever cannot be 
operated properly.

The lever may be mal-
functioning.

Change to optical mirror 
mode and have the vehi-
cle inspected by your 
Toyota dealer.
(To change to optical 
mirror mode, press and 
hold the menu button for 
approximately 10 sec-
onds.)

Symptom

Likely cause

Solution

Summary of Contents for Sienna 2021

























































































































































































































































































































































































































































































































































































































Reviews:

No comments