manualshive.com logo in svg

Toyota Sienna 2021, Manual, Page: 181 / 600

Share
Download
Toyota Sienna 2021 Manual Download Page 181

180

3-3. Adjusting the seats

The shift lever has been 
shifted to P.

The power switch has been 
turned off.

The driver’ seat belt has been 
unfastened.

When any of the following has 
been performed, the driver’ seat 
and steering wheel automati-
cally return to their original posi-
tions.

The power switch has been 
turned to ACC or ON.

The driver’ seat belt has been 
fastened.

■

Recording procedure

1

Check that the shift lever is in 
P.

2

Turn the power switch to ON.

3

Adjust the driver’s seat, 
steering wheel, outside rear 
view mirrors and head-up 
display (if equipped) to the 
desired positions.

4

While pressing the “SET” but-
ton, press button “1” or “2” 
until the buzzer sounds.

If the selected button has already 

been preset, the previously 

recorded position will be overwrit-

ten.

■

Recall procedure

1

Check that the shift lever is in 
P.

2

Turn the power switch to ON.

3

Press one of the buttons for 
the driving position you want 
to recall until the buzzer 
sounds.

■

To stop the position recall oper-

ation part-way through

Perform any of the following:

●

Press the “SET” button.

●

Press button “1” or “2”.

●

Operate any of the seat adjust-

ment switches (only cancels seat 

position recall).

●

Operate the tilt and telescopic 

steering control switch (only can-

cels steering wheel position 

recall).

Recording/recalling a 
driving position

Summary of Contents for Sienna 2021

























































































































































































































































































































































































































































































































































































































Reviews:

No comments