CURTMFG.COM
•
NEED ASSISTANCE?
•
877.287.8634
•
60638-INS-RA
•
PAGE 1
INSTALLATION MANUAL
60638
Level of Difficulty
Easy
Parts List
Item Qty Description
1
2
Safety chain anchor
2
2
Pin, 12mm
3
2
Lynch pin, 5mm
4
1
Gooseneck ball, 2-5/16"
Product Photo
Weight Capacity
Gross trailer weight (GTW)
38,000 lbs.
Vertical load
9,500 lbs.
Tools Required
None
Maintenance
When the ball and anchors are not in use,
remove them from the truck bed and store
in the included case or a dry, clean area.
Keep the gooseneck ball, safety chain
anchor pins and towing system lubricated
regularly. Use silicone spray or equivalent
to prevent wear and rust.
Place the puck system anchor hole covers
(supplied by the truck manufacturer) into
the puck system holes when the anchors
are removed to keep dirt and debris out.
Place a rubber cover into the
gooseneck receiver when the ball is
removed to keep dirt and debris out.
Failure to maintain the towing system could
result in poor performance and / or failure.
2
3
1
WARNING
Never exceed the vehicle manufacturer's recommended towing capacity.
Vehicle performance (braking, handling, acceleration, turning radius) can be drastically affected
by a trailer. Allow additional time and space for stopping, changing lanes, passing and turning.
Product Registration and Warranty
CURT Group stands behind our products with industry-leading warranties.
Provide feedback and help us to improve our products by registering your purchase at:
warranty.curtgroup.com/surveys
CAUTION
Severe bumps can damage the towing system. Avoid or drive slowly over rough terrain.
Do not tow more than one trailer at a time. This may cause loss of control.
NOTICE
Before you begin installation, read all instructions thoroughly.
