Toyota Prius 2018 Page 325 Owner'S Manual Download

Page: 325 / 820

PRIUS_OM_OM47B89U_(U)

325

4-5. Using the driving support systems

Drivin

Normal mode

Suitable for normal driving.

When normal mode is selected, the “ECO MODE” and “PWR MODE”
indicators turn off.

Power mode

Suitable for when crisp handling and enhanced accelerator
response are desired, such as when driving on mountainous roads.

When power mode is selected, the

“PWR MODE”

indicator will illuminate

on the main display.

Eco drive mode

Suitable for driving that improves fuel economy by generating
torque in response to accelerator pedal operations more smoothly
than in normal mode.

When Eco drive mode is selected, the “ECO MODE” indicator will illumi-
nate on the main display.

While the air conditioning is being used, the system automatically
switches to air conditioning eco mode (

→

P. 519, 529), allowing for driv-

ing that leads to even better fuel economy.

■

When canceling Eco drive mode/power mode

●

Press the switch again. Also, power mode will be canceled automatically
when the power switch is turned off.

●

However, Normal mode and Eco drive mode will not be canceled automati-
cally until the switch is pressed, even if the power switch is turned off.

■

Switching the drive mode when in EV drive mode

→

P. 238

Summary of Contents for Prius 2018





















































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius 2018

Reviews:

Related manuals for Prius 2018

Brands by name

Popular brands

Toyota Prius 2018, Owner'S Manual

Search results

Summary of Contents for Prius 2018

Reviews:

Related manuals for Prius 2018

Brands by name

Popular brands