manualshive.com logo in svg

Toyota Prius 2018, Owner'S Manual, Page: 637 / 820

Share
Download
Toyota Prius 2018 Owner'S Manual Download Page 637

637

PRIUS_OM_OM47B89U_(U)

7-3. Do-it-yourself maintenance

7

Mainten

ance an

d ca

re

Hybrid battery (traction battery) air intake vent

Remove the dust from the air
intake vent with a vacuum
cleaner, etc.

Make sure to only use a vacuum to
suck out dust and clogs. Attempt-
ing to blow out dust and clogs
using an airgun, etc. may push it
into the air intake vent. (

→

P. 641)

If dust and clogs cannot be completely removed with the air intake
vent cover installed, remove the cover and clean the filter.

Turn the power switch off.

Using a Phillips screwdriver,
remove the clip.

To prevent an increase in fuel consumption, visually inspect the
hybrid battery (traction battery) air intake vent periodically for
dust and clogs. If it is dusty or clogged or if “Maintenance
required for Traction battery cooling parts See owner’s manual”
is shown on the multi-information display, clean the air intake
vent using the following procedures:

Cleaning the air intake vent

If dust and clogs cannot be completely removed

1

2

Summary of Contents for Prius 2018





















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments