Toyota Prius 2018 Page 215 Owner'S Manual Download | Manualshive

Page: 215 / 820

background image

PRIUS_OM_OM47B89U_(U)

215

4-1. Before driving

4

Drivin

Firmly set the parking brake with the brake pedal depressed, and
then shift the shift position to D.

Release the brake pedal and gently depress the accelerator pedal.

Release the parking brake.

■

When starting off on a uphill

The hill-start assist control will activate. (

■

For fuel-efficient driving

Keep in mind that hybrid vehicles are similar to conventional vehicles, and it
is necessary to refrain from activities such as sudden acceleration. (

→

■

Driving in the rain

●

Drive carefully when it is raining, because visibility will be reduced, the win-
dows may become fogged-up, and the road will be slippery.

●

Drive carefully when it starts to rain, because the road surface will be espe-
cially slippery.

●

Refrain from high speeds when driving on an expressway in the rain,
because there may be a layer of water between the tires and the road sur-
face, preventing the steering and brakes from operating properly.

■

Restraining hybrid system output (Brake Override System)

●

When the accelerator and brake pedals are depressed at the same time, the
hybrid system output may be restrained.

●

A warning message is displayed on the multi-information display while the
system is operating. (

■

“ECO Accelerator Guidance” (

→

It is easier to drive in an Eco-friendly manner by driving while referring to the
“ECO Accelerator Guidance” display. Also, by using the “ECO Accelerator
Guidance”, it is easier to increase the Eco score evaluation.

●

When starting off:
While staying within the “ECO Accelerator Guidance” range, gradually
depress the accelerator pedal and accelerate to the desired speed. If exces-
sive acceleration is avoided, the “Eco-Start” score will increase.

●

When driving:
After accelerating to the desired speed, release the accelerator pedal and
drive at a stable speed within the “ECO Accelerator Guidance” range. By
keeping the vehicle within the “ECO Accelerator Guidance” range, the “Eco-
Cruise” score will increase.

●

When stopping:
When stopping the vehicle, early releasing the accelerator pedal will cause
the “Eco-Stop” score to increase.

Starting off on a steep uphill

1

2

3

«
...
213
214
215
216
217
...
»

Summary of Contents for Prius 2018





















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Prius 2018

Brand: Acdeos Pages: 7

Brand: Falcon Pages: 8

witty park XEV6 Series

Brand: hager Pages: 9

RadioPRO 5 RP5-GM41

Brand: PAC Pages: 3

Brand: Audi Pages: 9

Brand: Belkin Pages: 4

Stratus LHD 1997

Brand: Chrysler Pages: 1534

Brand: CALIMA Pages: 9

Brand: Jeep Pages: 16

Brand: Audi Pages: 4

Brand: Whelen Engineering Company Pages: 9

Brand: Belkin Pages: 2

Brand: PEUGEOT Pages: 232

transit connect 2012

Brand: Ford Pages: 299

spectroFlex Car Adapter

Brand: wtw Pages: 4

Brand: Easee Pages: 21

Brand: Toyota Pages: 26

Brand: Car-Interface Pages: 25

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands