Toyota Prius 2018 Page 178 Owner'S Manual Download

Page: 178 / 820

178

PRIUS_OM_OM47B89U_(U)

3-2. Opening, closing and locking the doors

Lower the back door using the
back door handle, and make sure
to push the back door down from
the outside to close it.

Be careful not to pull the back door
sideways when closing the back
door with the handle.

■

Luggage compartment light

The luggage compartment light turns on when the back door is opened with
the luggage compartment light switch on.

■

If the back door opener is inoperative

The back door can be unlocked from the inside.

When closing the back door

Off

When the power switch is turned off, the
light will go off automatically after 20
minutes.

Remove the cover.

To prevent damage, cover the tip of the
screwdriver with a rag.

Move the lever.

Summary of Contents for Prius 2018





















































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius 2018

Reviews:

Related manuals for Prius 2018

Brands by name

Popular brands

Toyota Prius 2018, Owner'S Manual

Search results

Summary of Contents for Prius 2018

Reviews:

Related manuals for Prius 2018

Brands by name

Popular brands