manualshive.com logo in svg

Toyota Prius 2018, Owner'S Manual, Page: 245 / 820

Share
Download
Toyota Prius 2018 Owner'S Manual Download Page 245

PRIUS_OM_OM47B89U_(U)

245

4-2. Driving procedures

4

Drivin

g

NOTICE

■

Hybrid battery (traction battery) charge

If the shift position is in N, the hybrid battery (traction battery) will not be
charged. To help prevent the battery from discharging, avoid leaving the N
position selected for an extended period of time.

■

Situations where shift control system malfunctions are possible

If any of the following situations occurs, shift control system malfunctions
are possible. 
Immediately stop the vehicle in a safe place on level ground, apply the park-
ing brake, and then contact your Toyota dealer.

●

When the warning message indicating the shift control system appears on
the multi-information display. (

→

P. 685)

●

The display indicates that no shift position is selected for more than a few
seconds.

■

Notes regarding shift lever and P position switch operation

Avoid repeatedly operating the shift lever and P position switch in quick suc-
cession.
The system protection function may activate and it will not be temporarily
possible to shift the shift position other than P. If this happens, please wait
for approximately 20 seconds before attempting to change the shift position
again.

Summary of Contents for Prius 2018





















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments