manualshive.com logo in svg

Toyota Prius 2018, Owner'S Manual, Page: 457 / 820

Share
Download
Toyota Prius 2018 Owner'S Manual Download Page 457

PRIUS_OM_OM47B89U_(U)

457

5-6. Using an external device

5

Audi

o system

●

MP3, WMA and AAC files

MP3 (MPEG Audio LAYER 3) is a standard audio compression format. 
Files can be compressed to approximately 1/10 of their original size using
MP3 compression.

WMA (Windows Media Audio) is a Microsoft audio compression format.
This format compresses audio data to a size smaller than that of the MP3
format. 

This product is protected by certain intellectual property rights of Microsoft
Corporation and third parties. Use or distribution of such technology outside
of this product is prohibited without a license from Microsoft or an autho-
rized Microsoft subsidiary and third parties.

AAC is short for Advanced Audio Coding and refers to an audio compres-
sion technology standard used with MPEG2 and MPEG4.

MP3, WMA and AAC file and media/formats compatibility are limited.

●

MP3 file compatibility

• Compatible standards 

MP3 (MPEG1 AUDIO LAYERII, III, MPEG2 AUDIO LAYERII, III,
MPEG2.5)

• Compatible sampling frequencies 

MPEG1 AUDIO LAYERII, III: 32, 44.1, 48 (kHz) 
MPEG2 AUDIO LAYERII, III: 16, 22.05, 24 (kHz)

• Compatible bit rates (compatible with VBR) 

MPEG1 AUDIO LAYERII, III: 32-320 (kbps) 
MPEG2 AUDIO LAYERII, III: 8-160 (kbps)

• Compatible channel modes: stereo, joint stereo, dual channel and mon-

aural

●

WMA file compatibility

• Compatible standards 

WMA Ver. 7, 8, 9

• Compatible sampling frequencies 

HIGH PROFILE 32, 44.1, 48 (kHz)

• Compatible bit rates 

HIGH PROFILE 48-320 (kbps, VBR)

●

AAC file compatibility

• Compatible standards 

MPEG4/AAC-LC

• Compatible sampling frequencies 

11.025/12/16/22.05/24/32/44.1/48 (kHz)

• Compatible bit rates 

16-320 (kbps)

• Compatible channel modes: 1 ch and 2 ch

●

File names

The only files that can be recognized as MP3/WMA/AAC and played are
those with the extension .mp3, .wma or .m4a.

Summary of Contents for Prius 2018





















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments