Toyota Prius 2018 Page 522 Owner'S Manual Download

Page: 522 / 820

522

6-1. Using the air conditioning system and defogger

PRIUS_OM_OM47B89U_(U)

■

Using automatic mode

Fan speed is adjusted automatically according to the temperature setting and
the ambient conditions.

Therefore, the fan may stop for a while until warm or cool air is ready to flow

immediately after

is pressed.

■

Setting confirmation screen

■

S-FLOW mode operation

■

Changing from manual S-FLOW mode to automatic S-FLOW mode

Press

to disable S-FLOW mode.

The

indicator will go off.

Turn the power switch off.

After 60 minutes have elapsed, change the power switch to ON mode.

■

Changing settings of the Automatic air conditioning system

The air conditioning system settings can be changed on the

screen

(

→

P. 135) of the multi-information display.

■

Fogging up of the windows

●

The windows will easily fog up when the humidity in the vehicle is high.

Pressing

on will dehumidify the air from the outlets and defog the

windshield effectively.

●

If you turn

off, the windows may fog up more easily.

●

The windows may fog up if the recirculated air mode is used.

When changing the settings of the air
conditioning system, the setting confirma-
tion screen is shown as a pop-up on the
multi-information display.

Press

of the meter control switches to

go back to the previous screen.

When

is pressed, the S-FLOW

mode status is displayed on the multi-
information display.

Summary of Contents for Prius 2018





















































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius 2018

Reviews:

Related manuals for Prius 2018

Brands by name

Popular brands

Toyota Prius 2018, Owner'S Manual

Search results

Summary of Contents for Prius 2018

Reviews:

Related manuals for Prius 2018

Brands by name

Popular brands