manualshive.com logo in svg

Toyota Prius 2018, Owner'S Manual, Page: 210 / 820

Share
Download
Toyota Prius 2018 Owner'S Manual Download Page 210

210

PRIUS_OM_OM47B89U_(U)

3-5. Opening and closing the windows and moon roof

■

When the moon roof does not close normally

Perform the following procedure:

Stop the vehicle.

Press and hold the “CLOSE” or “UP” switch.

*

The moon roof will tilt up, stop a little time and tilt down. Then it will open
fully and close again, and then stop.

Check to make sure that the moon roof has completely stopped and then
release the switch.

*

: If the switch is released at the incorrect time, the procedure will have to be

performed again from the beginning.

If the moon roof does not fully close even after performing the above proce-
dure correctly, have the vehicle inspected by your Toyota dealer.

■

Moon roof open reminder function

The buzzer sounds and a message is shown on the multi-information display
in the instrument cluster when the power switch is turned off and the driver’s
door is opened with the moon roof open.

■

Customization

Settings (e.g. linked door lock operation) can be changed. 
(Customizable features: 

→

P. 770)

1

2

3

Summary of Contents for Prius 2018





















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments