Home
/
Toyota
/
Prius 2018
/
Owner'S Manual

Toyota Prius 2018, Owner'S Manual, Page: 704 / 820

Share

Page: 704 / 820

Toyota Prius 2018 Owner'S Manual Download Page 704

704

8-2. Steps to take in an emergency

PRIUS_OM_OM47B89U_(U)

NOTICE

■

Be careful when driving over bumps with the compact spare tire
installed on the vehicle. (if equipped)

The vehicle height may become lower when driving with the compact
spare tire, compared to when driving with standard tires. Be careful
when driving over uneven road surfaces.

■

Driving with tire chains and the compact spare tire (if equipped)

Do not fit tire chains to the compact spare tire.
Tire chains may damage the vehicle body and adversely affect driving
performance.

■

When replacing the tires

When removing or fitting the wheels, tires or the tire pressure warning
valve and transmitter, contact your Toyota dealer as the tire pressure
warning valve and transmitter may be damaged if not handled correctly.

■

Handling the decorative resin parts (for vehicles equipped with
17-inch tires)

«
...
702
703
704
705
706
...
»

Summary of Contents for Prius 2018





















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments