manualshive.com logo in svg

Toyota Prius 2018, Owner'S Manual, Page: 270 / 820

Share
Download
Toyota Prius 2018 Owner'S Manual Download Page 270

270

PRIUS_OM_OM47B89U_(U)

4-4. Refueling

Press the opener to open the
fuel filler door.

The fuel filler door will open within
about 10 seconds of the switch
being pressed. Before refueling is
possible, a message will be shown
on the multi-information display in
the instrument cluster to indicate
the progress of the fuel filler door
opener.

Turn the fuel tank cap slowly to
open and hang it on the back of
the fuel filler door.

NOTICE

■

Refueling

●

Finish refueling within 30 minutes. If more than 30 minutes passes, the
internal valve closes. In this condition, fuel may overflow during the refuel-
ing process. 
Press the fuel filler door opener switch again.

●

Do not spill fuel during refueling. 
Doing so may damage the vehicle, such as causing the emission control
system to operate abnormally or damaging fuel system components or the
vehicle’s painted surface.

Opening the fuel tank cap

1

2

Summary of Contents for Prius 2018





















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments