manualshive.com logo in svg

Toyota Prius 2018, Owner'S Manual, Page: 730 / 820

Share
Download
Toyota Prius 2018 Owner'S Manual Download Page 730

730

8-2. Steps to take in an emergency

PRIUS_OM_OM47B89U_(U)

Connect the jumper cables according to the following procedure:

Connect a positive jumper cable clamp to the positive (+) battery
terminal on your vehicle.

Connect the clamp on the other end of the positive cable to the
positive (+) battery terminal on the second vehicle.

Connect a negative cable clamp to the negative (-) battery termi-
nal on the second vehicle.

Connect the clamp at the other end of the negative cable to a
solid, stationary, unpainted metallic point away from the 12-volt
battery and any moving parts, as shown in the illustration.

Start the engine of the second vehicle. Increase the engine speed
slightly and maintain at that level for approximately 5 minutes to
recharge the 12-volt battery of your vehicle.

Maintain the engine speed of the second vehicle and start the
hybrid system of your vehicle by turning the power switch to ON
mode.

Make sure the “READY” indicator comes on. If the indicator light
does not come on, contact your Toyota dealer.

3

1

2

3

4

3

2

4

1

4

5

6

Summary of Contents for Prius 2018





















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments