Toyota HILUX DC Owner'S Manual Download Page 221

Page: 221 / 874

220

3-5. Opening and closing the windows

HILUX_OM_OM0K440E_(GE)

Back window (sliding type)

The back window can be opened and closed using the lock release
lever.

To open the back window, push
the lock release lever and slide
the back window.

To close the back window, reverse
the opening procedure.

■

Closing the back window

Make sure that the back window is securely closed after closing it.

Opening and closing procedures

WARNING

■

Opening or closing the back window

Observe the following precautions.
Failure to do so may result in death or serious injury.

●

Check to make sure that all passengers do not have any part of their body
in a position where it could be caught when the window is being operated.

●

Do not allow children to operate the back window.
Closing the back window on someone can cause serious injury, and in
some instances, even death.

Summary of Contents for HILUX DC











































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for HILUX DC

Reviews:

Related manuals for HILUX DC

Brands by name

Popular brands

Toyota HILUX DC, Owner'S Manual

Search results

Summary of Contents for HILUX DC

Reviews:

Related manuals for HILUX DC

Brands by name

Popular brands