Toyota HILUX DC, Owner'S Manual

Page: 822 / 874

821
9
9-1. Specifications
V
e
h
icl
e s
p
e
c
ific
at
io
ns
HILUX_OM_OM0K440E_(GE)
 1GD-FTV and 2GD-FTV engines (except for EURO IV, V and VI
models
*
1
)
* 1
: EURO IV, V and VI are emission standards. If it is not clear that your vehi-
cle meets relevant standards, contact your Toyota dealer.
* 2
: The engine oil capacity is a reference quantity to be used when changing
the engine oil. Warm up and turn off the engine, wait more than 5 minutes,
and check the oil level on the dipstick.
■
Engine oil selection
“Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use
Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy
the following grade and viscosity.
Oil grade: API CF-4, CF or ACEA B3, B4, B5 or JASO DL-0
Recommended viscosity (SAE):
SAE 5W-30 is the best choice
for good fuel economy and
good starting in cold weather.
If you use SAE 10W-30 or a
higher viscosity engine oil in
extremely low temperatures,
the engine may become difficult
to start, so SAE 5W-30 engine
oil is recommended.
Oil capacity
(Drain and refill —
reference
* 2
)
With filter
Without filter 7.5 L (7.9 qt., 6.6 Imp.qt.)
7.0 L (7.4 qt., 6.2 Imp.qt.)
Preferred
Temperature range anticipated
before next oil change