Toyota HILUX DC Owner'S Manual Download Page 511

Page: 511 / 874

510

5-18. Playing DVD video

HILUX_OM_OM0K440E_(GE)

■

MP3, WMA and AAC files

MP3 (MPEG Audio LAYER 3) is a standard audio compression for-
mat.

Files can be compressed to approximately 1/10 of their original size
by using MP3 compression.

WMA (Windows Media Audio) is a Microsoft audio compression for-
mat.

This format compresses audio data to a size smaller than that of
the MP3 format.

AAC is short for Advanced Audio Coding and refers to an audio
compression technology standard used with MPEG2 and MPEG4.

MP3, WMA and AAC file and media/formats compatibility are lim-
ited.

●

MP3 file compatibility

• Compatible standards

MP3 (MPEG1 LAYER3, MPEG2 LSF LAYER3)

• Compatible sampling frequencies

MPEG1 LAYER3: 32, 44.1, 48 (kHz)
MPEG2 LSF LAYER3: 16, 22.05, 24 (kHz)

• Compatible bit rates (compatible with VBR)

MPEG1 LAYER3: 32—320 (kbps)
MPEG2 LSF LAYER3: 8—160 (kbps)

• Compatible channel modes: stereo, joint stereo, dual channel

and monaural

●

WMA file compatibility

• Compatible standards

WMA Ver. 7, 8, 9 (only compatible with Windows Media Audio
Standard)

• Compatible sampling frequencies

32, 44.1, 48 (kHz)

• Compatible bit rates (only compatible with 2-channel playback)

Ver. 7, 8: CBR 48—192 (kbps)
Ver. 9 (9.1/9.2): CBR 48—320 (kbps)

Summary of Contents for HILUX DC











































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for HILUX DC

Reviews:

Related manuals for HILUX DC

Brands by name

Popular brands

Toyota HILUX DC, Owner'S Manual

Search results

Summary of Contents for HILUX DC

Reviews:

Related manuals for HILUX DC

Brands by name

Popular brands