Toyota HILUX DC, Owner'S Manual

Page: 163 / 874

162
2. Instrument cluster
HILUX_OM_OM0K440E_(GE)
Items displayed can be switched by pressing “

” or “

” of the meter
control switches to select and pressing “

” or “

”.
■
Drive information 1 and 2
● Current fuel economy (bar type/value type)
*
1, 2
Displays the current rate of fuel consumption.
●
Average fuel economy (after reset
*
3
/after start/after refuel)
*
1, 2
Displays the average fuel consumption since the function was
reset, the engine was started and the vehicle was refueled
respectively.
● Average speed (after reset
*
3
/after start)
*
1
Displays the average vehicle speed since the function was reset
and the engine was started respectively.
● Elapsed time (after reset
*
3
/after start)
*
1
Displays the elapsed time since the function was reset and the
engine was started respectively.
● Distance (range/after start)
*
1
Displays the estimated maximum distance that can be driven
with the quantity of fuel remaining and the distance driven after
the engine was started respectively.
• This distance is computed based on your average fuel con-
sumption. As a result, the actual distance that can be driven
may differ from that displayed.
• When only a small amount of fuel is added to the tank, the dis-
play may not be updated.
When refueling, turn the engine switch off. If the vehicle is
refueled without turning the engine switch off, the display may
not be updated.
* 1
: Can be registered to drive information 1 and 2. (

P. 164)
* 2
: Use the displayed fuel consumption as a reference.
* 3
: Resetting procedures:
• Select a function to be reset using the meter control switches and
then press and hold to reset.
• If there is more than one function that can be reset, check boxes will
be displayed next to those functions.
Drive information