Toyota HILUX DC Owner'S Manual Download Page 399

Page: 399 / 874

398

5-5. Using an external device

HILUX_OM_OM0K440E_(GE)

■

Selecting folders one at a time

Press

(<FOLDER) or

(FOLDER>) to select the desired

folder.

■

Selecting a folder and file from folder list

Press

(LIST).

The folder list will be displayed.

Press the “TUNE >” or “< SELECT” button to select a folder and
file, and press the “SETUP ENTER” button.

To return to the previous display, press

(BACK).

■

Returning to the first folder

Press and hold

(<FOLDER) until you hear a beep.

Press the “SEEK >” or “< TRACK” button to select the desired file.

Press and hold the “SEEK >” or “< TRACK” button.

Pressing

(RDM) changes modes in the following order:

Folder random



All folder random



Off

Pressing

(RPT) changes modes in the following order:

File repeat



Folder repeat



Off

: Available except when RDM (random play) is selected

Press

(TEXT) to display or hide the album title.

If there are continuing texts,

is displayed.

Press and hold

(TEXT) to display the remaining texts.

Selecting a folder

Selecting a file

Fast-forwarding and rewinding files

Random play

Repeat play

Switching the display

Summary of Contents for HILUX DC











































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for HILUX DC

Reviews:

Related manuals for HILUX DC

Brands by name

Popular brands

Toyota HILUX DC, Owner'S Manual

Search results

Summary of Contents for HILUX DC

Reviews:

Related manuals for HILUX DC

Brands by name

Popular brands