Toyota HILUX DC Owner'S Manual Download Page 559

Page: 559 / 874

558

5-22. Bluetooth

Phone

HILUX_OM_OM0K440E_(GE)

15 messages have already been stored.

Display the “Message inbox” screen. (



P. 555)

Select the desired message from the list.

Select “Quick message”.

Select the desired message.

Select “Send”.

While the message is being sent, a sending message screen is displayed.

To cancel sending the message, select “Cancel”.

■

Editing quick reply messages

Display the “Message inbox” screen. (



P. 555)

Select the desired message from the list.

Select “Quick message”.

Select

corresponding to the desired message to edit.

To reset the edit quick reply messages, select “Default”.

Select “OK” when editing is completed.

■

While driving

The function “Editing quick reply messages” is unavailable.

Replying to a message (quick reply)

Summary of Contents for HILUX DC











































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for HILUX DC

Reviews:

Related manuals for HILUX DC

Brands by name

Popular brands

Toyota HILUX DC, Owner'S Manual

Search results

Summary of Contents for HILUX DC

Reviews:

Related manuals for HILUX DC

Brands by name

Popular brands