Toyota HILUX DC Owner'S Manual Download Page 384

Page: 384 / 874

383

5-4. Playing an audio CD and MP3/WMA discs

Au
dio
sy
s

tem

HILUX_OM_OM0K440E_(GE)

■

MP3 and WMA files

MP3 (MPEG Audio LAYER3) is a standard audio compression format.

Files can be compressed to approximately 1/10 of their original size by using
MP3 compression.

WMA (Windows Media Audio) is a Microsoft audio compression format.

This format compresses audio data to a size smaller than that of the MP3 for-
mat.

There is a limit to the MP3 and WMA file standards and to the media/formats
recorded by them that can be used.

●

MP3 file compatibility

• Compatible standards

MP3 (MPEG1 LAYER3, MPEG2 LSF LAYER3)

• Compatible sampling frequencies

MPEG1 LAYER3: 32, 44.1, 48 (kHz)
MPEG2 LSF LAYER3: 16, 22.05, 24 (kHz)

• Compatible bit rates (compatible with VBR)

MPEG1 LAYER3: 32—320 (kbps)
MPEG2 LSF LAYER3: 8—160 (kbps)

• Compatible channel modes: stereo, joint stereo, dual channel and mon-

aural

●

WMA file compatibility

• Compatible standards

WMA Ver. 7, 8, 9

• Compatible sampling frequencies

32, 44.1, 48 (kHz)

• Compatible bit rates (only compatible with 2-channel playback)

Ver. 7, 8: CBR 48—192 (kbps)
Ver. 9: CBR 48—320 (kbps)

Summary of Contents for HILUX DC











































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for HILUX DC

Reviews:

Related manuals for HILUX DC

Brands by name

Popular brands

Toyota HILUX DC, Owner'S Manual

Search results

Summary of Contents for HILUX DC

Reviews:

Related manuals for HILUX DC

Brands by name

Popular brands