Toyota HILUX DC Owner'S Manual Download Page 671

Page: 671 / 874

670

7-3. Do-it-yourself maintenance

HILUX_OM_OM0K440E_(GE)

■

Adding engine oil

If the oil level is below or near
the low level mark, add engine
oil of the same type as that
already in the engine.

Make sure to check the oil type and prepare the items needed
before adding oil.

Remove the sand and dust from around the oil filler cap.

Remove the oil filler cap by turning it counterclockwise.

Add engine oil slowly, checking the dipstick.

Install the oil filler cap by turning it clockwise.

Engine oil selection



P. 813

Oil quantity
(Low



Full)

Except 5L-E engine

1.5 L (1.6 qt., 1.3 Imp.qt.)

5L-E engine

1.4 L (1.5 qt., 1.2 Imp.qt.)

Items

Clean funnel

Summary of Contents for HILUX DC











































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for HILUX DC

Reviews:

Related manuals for HILUX DC

Brands by name

Popular brands

Toyota HILUX DC, Owner'S Manual

Search results

Summary of Contents for HILUX DC

Reviews:

Related manuals for HILUX DC

Brands by name

Popular brands