Toyota HILUX DC Owner'S Manual Download Page 95

Page: 95 / 874

1-2. Child safety

HILUX_OM_OM0K440E_(GE)

■

Before confirming the compatibility of each seating position
with child restraint systems

Checking the child restraint system standards.

Use a child restraint system that conforms to UN(ECE) R44

UN(ECE) R129

1, 2

The following approval mark is displayed on child restraint sys-
tems which are conformed.

Check for an approval mark attached to the child restraint sys-
tem.

Example of the displayed
regulation number

UN(ECE) R44 approval
mark

The weight range of the
child who is applicable for
an UN(ECE) R44 approval
mark is indicated.

UN(ECE) R129 approval
mark

The height range of the
child who is applicable as
well as available weights
for an UN(ECE) R129
approval mark is indicated.

: UN(ECE) R44 and UN(ECE) R129 are U.N. regulations for child

restraint systems.

: The child restraint systems mentioned in the table may not be avail-

able outside of the EU area.

: The displayed mark may differ depending on the product.

Summary of Contents for HILUX DC











































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for HILUX DC

Reviews:

Related manuals for HILUX DC

Brands by name

Popular brands

Toyota HILUX DC, Owner'S Manual

Search results

Summary of Contents for HILUX DC

Reviews:

Related manuals for HILUX DC

Brands by name

Popular brands