Toyota Corolla Hatchback 2023 Manual Download Page 303

Page: 303 / 436

303

6-3. Do-it-yourself maintenance

Maintena

nce
a

nd ca

Turn the engine switch off.

Open the glove box. Slide off
the damper.

Push in the glove box on the
vehicle’s outer side to discon-
nect the claws. Then pull out
the glove box and disconnect
the lower claws.

Unlock the filter cover ( ),
pull the filter cover out of the

claws ( ), and remove the
filter cover.

Remove the filter case.

Remove the air conditioning
filter from the filter case and
replace it with a new one.

The “

UP” marks shown on the

filter and the filter case should be

pointing up.

■

Checking interval

Inspect and replace the air condi-

tioning filter according to the mainte-

nance schedule. In dusty areas or

areas with heavy traffic flow, more

Air conditioning filter

The air conditioning filter
must be changed regularly
to maintain air conditioning
efficiency.

Removing the air condi-
tioning filter

Summary of Contents for Corolla Hatchback 2023





















































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hatchback 2023

Reviews:

Related manuals for Corolla Hatchback 2023

Brands by name

Popular brands

Toyota Corolla Hatchback 2023, Manual

Search results

Summary of Contents for Corolla Hatchback 2023

Reviews:

Related manuals for Corolla Hatchback 2023

Brands by name

Popular brands