Toyota Corolla Hatchback 2023 Manual Download Page 142

Page: 142 / 436

142

4-2. Driving procedures

burned out.

■

Customization

Some functions can be customized.

(



P.386)

■

Using the manual mode

The parking brake can be set
and released manually.

U.S.A.
Canada

Pull the switch to set the
parking brake.

The parking brake indicator light
will turn on.

Parking brake

The parking brake can be
set or released automati-
cally or manually.

In automatic mode, the
parking brake can be set or
released automatically
according to shift lever
operation.

Also, even in automatic
mode, the parking brake can
be set or released manually.

Operating instructions

Summary of Contents for Corolla Hatchback 2023





















































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hatchback 2023

Reviews:

Related manuals for Corolla Hatchback 2023

Brands by name

Popular brands

Toyota Corolla Hatchback 2023, Manual

Search results

Summary of Contents for Corolla Hatchback 2023

Reviews:

Related manuals for Corolla Hatchback 2023

Brands by name

Popular brands