Toyota Corolla Hatchback 2023, Manual

Page: 294 / 436

294
6-3. Do-it-yourself maintenance
yourself, but depending on
the driving conditions and
driving environment, registra-
tion may take some time to
complete.
 When using a wheel set
which all of the ID codes have
already been registered, the
wheel set can be changed in
a short amount of time.
Before performing ID code reg-
istration, make sure that no
wheels with tire pressure warn-
ing valve and transmitters
installed are near the vehicle.

4.2-inch display
1
Park the vehicle in a safe
place and turn the engine
switch off, wait for approxi-
mately 20 minutes or more,
and then start the engine.
The ID code registration procedure
cannot be performed while the
vehicle is moving.
2
Select of the multi-infor-
mation display and then
press .
3
Press or to select
“Vehicle Settings” and then
press and hold .
4
Press or to select
“TPWS setting” and then
press .
5
Press or to select
“Tire Set Switching” and then
press .
6
Press or to select
“Register New Valve / ID” and
then press ..
7
Press or to select
“Tire Set 1” or “Tire Set 2”.
Then press .
ID codes will be registered to the
displayed wheel set.
If ID codes have already been reg-
istered for that wheel set, the tire
pressure warning light will slowly
blink 3 times, and a message indi-
cating that change is occurring will
be displayed on the multi-informa-
tion display.
8
Select “OK” and then press
.
The tire pressure warning light will
slowly blink 3 times and a message
indicating that ID code registration
is being performed will be displayed
on the multi-information display.
Wheel set changing will be can-
celed and registration will begin.
When registration is being per-
formed, the tire pressure warning
light will blink for approximately 1
minute then illuminate and “---” will
be displayed for the inflation pres-