Toyota Corolla Hatchback 2023 Manual Download Page 161

Page: 161 / 436

161

4-5. Using the driving support systems

ing

Toyota Safety Sense

3.0

The Toyota Safety Sense 3.0
consists of the driving
assist systems and contrib-
utes to a safe and comfort-
able driving experience:

WARNING

■

Toyota Safety Sense 3.0

The Toyota Safety Sense 3.0

operates under the assumption

that the driver will drive safely,

and is designed to help reduce

the impact to the occupants in a

collision and assist the driver

under normal driving conditions.

As there is a limit to the degree of

recognition accuracy and control

performance that this system can

provide, do not overly rely on this

system. The driver is solely

responsible for paying attention to

the vehicle’s surroundings and

driving safely.

■

For safe use

●

Do not overly rely on this sys-

tem. The driver is solely respon-

sible for paying attention to the

vehicle’s surroundings and driv-

ing safely. This system may not

operate in all situations and pro-

vided assistance is limited.

Over-reliance on this system to

drive the vehicle safely may

lead to an accident resulting in

death or serious injury.

●

Do not attempt to test the oper-

ation of the system, as it may

not operate properly, possibly

leading to an accident.

●

If attention is necessary while

performing driving operations or

a system malfunction occurs, a

warning message or warning

buzzer will be operated. If a

warning message is displayed

on the display, follow the

instructions displayed.

●

Depending on external noise,

the volume of the audio system,

etc. it may be difficult to hear the

warning buzzer. Also, depend-

ing on the road conditions, it

may be difficult to recognize the

operation of the system.

■

When it is necessary to dis-

able the system

In the following situations, make

sure to disable the system.

Failure to do so may lead to the

system not operating properly,

possibly leading to an accident

resulting in death or serious injury.

●

When the vehicle is tilted due to

being overloaded or having a

flat tire

●

When driving at extremely high

speeds

●

When towing another vehicle

●

When the vehicle is being trans-

ported by a truck, ship, train,

etc.

●

When the vehicle is raised on a

lift and the tires are allowed to

rotate freely

●

When inspecting the vehicle

using a drum tester such as a

chassis dynamometer or speed-

ometer tester, or when using an

on vehicle wheel balancer

●

When the vehicle is driven in a

sporty manner or off-road

●

When using an automatic car

wash

Summary of Contents for Corolla Hatchback 2023





















































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hatchback 2023

Reviews:

Related manuals for Corolla Hatchback 2023

Brands by name

Popular brands

Toyota Corolla Hatchback 2023, Manual

Search results

Summary of Contents for Corolla Hatchback 2023

Reviews:

Related manuals for Corolla Hatchback 2023

Brands by name

Popular brands