Toyota Corolla Hatchback 2023 Manual Download Page 252

Page: 252 / 436

252

5-4. Other interior features

tium.

■

Name for all parts

Power supply switch
Operation indicator light
Charge area
Charging tray

■

Using the wireless charger

Press the power supply
switch of the wireless char-
ger.

Pressing the switch again turns the

wireless charger off.

When turned on, the operation indi-

cator light (green) comes on.

When the engine switch is turned

off, the on/off state of the wireless

charger will be memorized.

Place a portable device on
the charging area with its
charging surface facing
down.

Depending on the portable device,

its charging coil may not be in the

center of the device. In this case,

place the portable device so that its

charging coil is centered in the

charging area.

While charging, the operation indi-

cator light (orange) will be illumi-

nated.

If charging is not occurring, the

operation indicator light slowly blink

in green and orange alternately,

and coil operating sound may be

heard. Try placing the portable

device as close to the center of the

charging area as possible.

When charging is complete, the

operation indicator light (green) will

illuminate.

■

Recharging function



If a certain amount of time has
elapsed since charging com-

Summary of Contents for Corolla Hatchback 2023





















































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hatchback 2023

Reviews:

Related manuals for Corolla Hatchback 2023

Brands by name

Popular brands

Toyota Corolla Hatchback 2023, Manual

Search results

Summary of Contents for Corolla Hatchback 2023

Reviews:

Related manuals for Corolla Hatchback 2023

Brands by name

Popular brands