Toyota Corolla Hatchback 2023 Manual Download Page 11

Page: 11 / 436

Reading this manual

Explains symbols used in
this manual.

Symbols in this manual

Symbols

Meanings

WARNING:
Explains something
that, if not obeyed,
could cause death or
serious injury to peo-
ple.

NOTICE:
Explains something
that, if not obeyed,
could cause dam-
age to or a malfunc-
tion in the vehicle or
its equipment.

Indicates operating
or working proce-
dures. Follow the
steps in numerical
order.

Symbols in illustrations

Symbols

Meanings

Indicates the action
(pushing, turning,
etc.) used to operate
switches and other
devices.

Indicates the out-
come of an operation
(e.g. a lid opens).

Symbols

Meanings

Indicates the compo-
nent or position
being explained.

Means

Do not

not do this

, or

not let this happen

Summary of Contents for Corolla Hatchback 2023





















































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hatchback 2023

Reviews:

Related manuals for Corolla Hatchback 2023

Brands by name

Popular brands

Toyota Corolla Hatchback 2023, Manual

Search results

Summary of Contents for Corolla Hatchback 2023

Reviews:

Related manuals for Corolla Hatchback 2023

Brands by name

Popular brands