Toyota Corolla Hatchback 2023 Manual Download Page 409

Page: 409 / 436

409

What to do if... (Troubleshooting)



Is the engine switch in ON?

If you cannot release the shift lever
by depressing the brake pedal with
the engine switch in ON. (



P.139)



Is the window lock switch
pressed?

The power window except for the
one at the driver’s seat cannot be
operated if the window lock switch
is pressed. (



P.119)



The auto power off function
will be operated if the vehicle
is left in ACC or ON mode
(the engine is not running) for
a period of time. (



P.136)



The seat belt reminder light is
flashing

Are the driver and the front passen-
ger wearing the seat belts?
(



P.323)



The parking brake indicator is
on

Is the parking brake released?
(



P.142)

Depending on the situation,
other types of warning buzzer
may also sound. (



P.320, 3 30)



Did anyone inside the vehicle
open a door during setting the
alarm?

The sensor detects it and the alarm
sounds. (



P.65)

Do one of the following to deac-
tivate or stop the alarms:



Unlock the doors.



Turn the engine switch to
ACC or ON, or start the
engine. (The alarm will be
deactivated or stopped after a
few seconds.)



Is the electronic key left inside
the vehicle?

Check the message on the
multi-information display. (



P.330)



When a warning light turns on
or a warning message is dis-
played, refer to P.320, 330.

The shift lever cannot be
shifted from P even if you
depress the brake pedal

The windows do not open
or close by operating the
power window switches

The engine switch is
turned off automatically

A warning buzzer sounds
during driving

An alarm is activated and
the horn sounds (vehicles
with an alarm)

A warning buzzer sounds
when leaving the vehicle

A warning light turns on
or a warning message is
displayed

Summary of Contents for Corolla Hatchback 2023





















































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hatchback 2023

Reviews:

Related manuals for Corolla Hatchback 2023

Brands by name

Popular brands

Toyota Corolla Hatchback 2023, Manual

Search results

Summary of Contents for Corolla Hatchback 2023

Reviews:

Related manuals for Corolla Hatchback 2023

Brands by name

Popular brands