Toyota Corolla Hatchback 2023 Manual Download Page 160

Page: 160 / 436

160

4-5. Using the driving support systems

Access the following URL
using a computer or smart-
phone:



For the U.S.A. owners

https://www.toyota.com/owners/
resources/
warranty-owners-manuals/
manual?om=
om12q37u.corollahatchback.
2023.2209.cv.vh



For Canadian owners

https://www.toyota.ca/toyota/
owners/manual?om=
om12q37d.corollahatchback.
2023.2209.cv.vh

Select the file which includes
the previously checked sys-
tem version.

If a software update is available,
a notification will be displayed
by OneApp. Follow the instruc-
tions displayed on the screen.

■

Software update precautions

●

After a software update has been

performed, it will not be possible

to revert to a previous version.

●

Depending on the communication

environment and the content of an

update, a software update may

take several hours. Although an

update will be suspended when

the power switch is turned off, it

will resume when the power

switch is changed back to ON

mode.

●

Toyota Safety Sense can still be

used while a software update is

being performed.

■

What can be checked using the

OneApp

The following items can be checked

or performed.

●

Software version, update details,

precautions, use methods, etc.

●

Software update

Using your vehicle’s Toy-
ota Safety Sense version

Updating the software

Summary of Contents for Corolla Hatchback 2023





















































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hatchback 2023

Reviews:

Related manuals for Corolla Hatchback 2023

Brands by name

Popular brands

Toyota Corolla Hatchback 2023, Manual

Search results

Summary of Contents for Corolla Hatchback 2023

Reviews:

Related manuals for Corolla Hatchback 2023

Brands by name

Popular brands