Toyota Corolla Hatchback 2023 Manual Download Page 122

Page: 122 / 436

122

4-1. Before driving

4-1.Before driving

■

Starting the engine



P.133

■

Driving

With the brake pedal
depressed, shift the shift
lever to D. (



P.137)

Release the parking brake.
(



P.142)

If the parking brake is in automatic

mode, the parking brake will be

released automatically. (



P.142)

Gradually release the brake
pedal and gently depress the
accelerator pedal to acceler-
ate the vehicle.

■

Stopping

With the shift lever in D,
depress the brake pedal.

If necessary, set the parking
brake. (



P.142)

If the vehicle is to be stopped for an

extended period of time, shift the

shift lever to P. (



P.137)

■

Parking the vehicle

With the shift lever in D,
depress the brake pedal to
stop the vehicle completely.

Set the parking brake
(



P.142), and shift the shift

lever to P. (



P.137)

Make sure the parking brake indi-

cator light is on.

Press the engine switch to
stop the engine.

Slowly release the brake
pedal.

Lock the door, making sure
that you have the key on your
person.

If parking on a hill, block the wheels

as needed.

■

Starting off on a steep
uphill

Make sure that the parking
brake is set and shift the shift
lever to D.

Gently depress the accelera-
tor pedal.

Release the parking brake.

■

Driving in the rain

●

Drive carefully when it is raining,

because visibility will be reduced,

the windows may become

fogged-up, and the road will be

slippery.

●

Drive carefully when it starts to

rain, because the road surface will

be especially slippery.

●

Refrain from high speeds when

driving on an expressway in the

rain, because there may be a

layer of water between the tires

and the road surface, preventing

the steering and brakes from

operating properly.

■

Engine speed while driving

In the following conditions, the

engine speed may become high

while driving. This is due to auto-

matic up-shifting control or

down-shifting implementation to

meet driving conditions. It does not

Driving the vehicle

The following procedures
should be observed to
ensure safe driving:

Driving procedure

Summary of Contents for Corolla Hatchback 2023





















































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hatchback 2023

Reviews:

Related manuals for Corolla Hatchback 2023

Brands by name

Popular brands

Toyota Corolla Hatchback 2023, Manual

Search results

Summary of Contents for Corolla Hatchback 2023

Reviews:

Related manuals for Corolla Hatchback 2023

Brands by name

Popular brands