Toyota 2007 Yaris Sedan Owner'S Manual Download Page 37

Page: 37 / 299

2007 YARIS SEDAN from Oct. ’06 Prod. (OM52736U)

Fuel tank cap

US12019

This indicates that the fuel filler door

is on the left side of your vehicle.

US12025a

1. To open the fuel filler door, pull the

lever up.
When refueling, turn off the engine.

CAUTION

Do not smoke, cause sparks or al-
low open flames when refueling.

The fumes are flammable.

When opening the cap, do not re-
move the cap quickly. In hot weath-

er, fuel under pressure could cause

injury by spraying out of the filler
neck if the cap is suddenly re-

moved.

US12024

2. To remove the fuel tank cap, turn

the cap slowly counterclockwise,
then pause slightly before removing

it. After removing the cap, hang it

on the cap hanger.

It is not unusual to hear a slight swoosh

when the cap is opened.

When installing the cap, turn it clock-

wise until one click is heard, in order

to fully close it. The cap returns slight-
ly when your hand is released from the

cap after closure, however this does

not cause any problems.

If the cap is not tightened securely, the

malfunction indicator lamp comes on.
Make sure the cap is tightened securely.

06 09.07

Summary of Contents for 2007 Yaris Sedan












































































































































































































































































































Search results

Summary of Contents for 2007 Yaris Sedan

Reviews:

Related manuals for 2007 Yaris Sedan

Brands by name

Popular brands

Toyota 2007 Yaris Sedan, Owner'S Manual

Search results

Summary of Contents for 2007 Yaris Sedan

Reviews:

Related manuals for 2007 Yaris Sedan

Brands by name

Popular brands