Toyota 2007 Yaris Sedan Owner'S Manual Download Page 93

Page: 93 / 299

2007 YARIS SEDAN from Oct. ’06 Prod. (OM52736U)

US13096a

Canada only

Type B

1. Widen the gap between the seat

cushion and seatback slightly and

confirm the position of the lower an-
chorages below the button on the

seatback.

2. Type A—Latch the hooks of lower

straps onto the anchorages and

tighten the lower straps.
Type B—Latch the buckles onto the

anchorages.

For owners in Canada

The symbol on a child restraint system

indicates  the  presence  of  a  lower  connec-
tor  system.
If  your  child  restraint  system  has  a  top

strap, it should be anchored. (For the
installation of the top strap, see “—Using

a top strap” on page 82 in this Section.)
For installation details, refer to the instruc-

tion manual equipped with each product.

CAUTION

When using the lower anchorages
for the child restraint system, be

sure that there are no irregular ob-

jects around the anchorages or that
the seat belt is not caught.

Push and pull the child restraint

system in different directions to be
sure it is secure. Follow all the

installation instructions provided by

its manufacturer.

After securing the child restraint

system, never slide or recline the
seat.

Do not install a child restraint sys-
tem on the rear seat if it interferes

with the lock mechanism of the

front seats. Otherwise, the child or
front seat occupant(s) may be killed

or seriously injured in case of sud-

den braking or a collision.

06 09.07

Summary of Contents for 2007 Yaris Sedan












































































































































































































































































































Search results

Summary of Contents for 2007 Yaris Sedan

Reviews:

Brands by name

Popular brands

Toyota 2007 Yaris Sedan, Owner'S Manual

Search results

Summary of Contents for 2007 Yaris Sedan

Reviews:

Brands by name

Popular brands