Toyota 2007 Yaris Sedan Owner'S Manual Download Page 270

Page: 270 / 299

262

2007 YARIS SEDAN from Oct. ’06 Prod. (OM52736U)

Remove and replace the reservoir cap by

hand. Fill the brake fluid to the dotted

line.  This  brings  the  fluid  to  the  correct
level  when  you  put  the  cap  back  on.
Use  only  newly  opened  brake  fluid.  Once

opened, brake fluid absorbs moisture from
the air, and excess moisture can cause a

dangerous loss of braking.

CAUTION

Take care when filling the reservoir
because brake fluid can harm your

hands or eyes. If fluid gets on your

hands or in your eyes, flush the af-
fected area with clean water immedi-

ately. If you still feel uncomfortable

with your hands or eyes, go to the
doctor.

NOTICE

If you spill some of the fluid, be sure
to wipe it off to prevent it from dam-

aging the parts or paintwork.

US72004

Keep your tire inflation pressures

at the proper level.

The recommended cold tire inflation

pressures, tire sizes and the com-

bined weight of occupants and cargo

(vehicle capacity weight) are de-

scribed on page 284 and 287. They

are also described on the tire and

loading information label as shown.
You should check the tire inflation

pressures every two weeks, or at

least once a month. And do not forget

the spare!

The following instructions for

checking tire inflation pressure

should be observed:

The

pressure

should

checked only when the tires are

cold.

If your vehicle has been

parked for at least 3 hours and has

not been driven for more than 1.5

km or 1 mile since, you will get

an accurate cold tire inflation pres-

sure reading.

06 09.07

Checking tire inflation

pressure

Summary of Contents for 2007 Yaris Sedan












































































































































































































































































































Search results

Summary of Contents for 2007 Yaris Sedan

Reviews:

Related manuals for 2007 Yaris Sedan

Brands by name

Popular brands

Toyota 2007 Yaris Sedan, Owner'S Manual

Search results

Summary of Contents for 2007 Yaris Sedan

Reviews:

Related manuals for 2007 Yaris Sedan

Brands by name

Popular brands